Posted by Phil Perut on May 8, 2017 9:20:24 AM
Phil Perut
Find me on:

New Messenger  6000 series

SES America and partner, successfully installed and commissioned several Dynamic Message Signs on RT 24 between mile marker 10, and 27 in Massachusetts. These signs will provide traffiinformation on this busy road between the Boston area and Southern Massachusetts. They are installed close by to other SESA signs used to display travel time information as part of the "Go Time" project .

M6000 DMS in Mass2.jpg

NTCIP Integration

Our Messenger 6000 is connected to MassDOT Traffic management Center using the latest version of NTCIP. "We worked very efficiently with the DOT to test and integrate the signs prior to delivery" said SESA Quality Control and ITS Maintenance Manager, Derek Corbo. "We connected them remotely from our facility in Warwick, RI and were able to perform all tests before shipping the signs to site. The DOT was able to connect and display messages from their Traffic management Center. When we tested the sign at site everything went well and the signs were fully operational in just a few days".

 

 Web Server  Software and Energy Efficiency

Our DMS are provided with the latest version of our SCU6 controller equipped with embedded web server software. This software provides tremendous benefits for maintenance like easy access to fault reports, test messages, firmware upgrade, etc. These controllers can be upgraded remotely at any time with newer versions available, and allow graphics and new pre-defined message configuration.

Messenger 6000's energy efficiency will allow the DOT to lower operational costs, due to this series' low energy consumption. Thanks to the use of the latest LED generation and other efficient control features, this series is 30% less than the industry standard, without compromising visibility and brightness.

 SCU6 NTCIP Controller.jpgSCU6v3 w-SESA logo.jpg

 

 

 

Introductory Mobility Guide

 

Topics: NTCIP, Product Library

Phil Perut

Written by Phil Perut

Phil has been working for the SES group since the early 2000’s; he has extensive and valuable technical experience as an electronic engineer and as a project and business unit manager. Phil earned an executive MBA from the University of Tours, France and Chicago, IL in 2011. Prior to joining SESA, Phil spent 10 years working around the world for a large electrical contracting group. He spent most of his time in Asia and the Middle East before moving to the US in 2006 and starting FDS, which eventually became SES America. Phil enjoys sailing, especially in Newport, RI and he is always ready to discover new countries and cultures. Despite this worldliness, Phil’s favorite hobby now is staying at home and taking care of his family. Phil can be reached at phil.perut@sesamerica.com and his cell phone number is 401-585-7026.